The best rubber roofs are Modified Bitumen Membranes – Pittsburgh
We have been in business for over 30 years. We serve all areas Stamford, Greenwich, Pittsburgh, Monroeville
Check out this site about Modified Bitumen membrane systems
Installing a roof on new construction is always the easiest and cleanest option. Before the siding goes on a house, the rubber roof and flashing is installed, then the siding will be installed over the flashing.
There are fewer things to contend with when it’s a new building. It’s always the choice of material and the installer that will make the difference as to how long the roof will last before having any problems.
We serve Fairfield county, Connecticut including Ridgefield, Westport, Darien and Greenwich.
Installing a rubber roof.
When it comes to installing a rubber roof on an existing house, then there are a lot of factors to take in consideration.
This list will help to define those factors:
- Type of Rubber membrane to use. There are mainly 2 types to choose from. EPDM or Modified Bitumen Membrane. They both are good rubbers but it’s the technique involved in installing them that will determine what makes the roof maintenance free.
- The Roofing Contractor – This is a hard one. Not all roofing contractors are experienced in installing rubber membranes. Most of them will recommend EPDM because they don’t know any better. Eight out of Ten roofers will sell the homeowner an EPDM rubber roof. Their arguments will sound very convincing, only because they only know EPDM.
- To remove or to install over an existing roof: It’s more costly to remove an existing roof and prepare for a new roof than to install over an existing roof.
– To install an EPDM rubber roof the surface has to be smooth and free from tar. Petroleum products will eat into EPDM rubber causing holes. So the choice will be to remove the old tar roof or to install a layer of 1/2 fiberboard over the existing roof to get a smooth surface free from tar. Nearly every time new flashing will have to be installed.